Check Seoul road restrictions in the Accidents and Restrictions list on TOPIS. First, note the road names and your direction of travel. Check whether the restrictions apply when you plan to pass through. For a “Normal” status on Gilcheck, also check the basis for marking the incident as ended.
The figures and examples in this article are based on official information checked on November 13, 2026.
How to Check Seoul Road Restrictions on TOPIS
Start by checking the restrictions for the section you plan to travel through on TOPIS. The home page has an Accidents and Restrictions list. It also provides a This Week’s Rallies/Events (Scheduled) tab. You can find these menus at Seoul Transport Operation and Information Service TOPIS.
- Note the road names and your direction of travel. Also have the date and time you plan to pass through the section ready.
- Open Accidents and Restrictions on the TOPIS home page. Select the relevant category from Accidents/Breakdowns, Construction/Rallies, or Weather/Fires.
- Check when the incident began and when it is expected to end. Also read whether it involves a full or partial closure.
- Check both current and scheduled restrictions on the map. Compare the restricted section with your route to see whether they overlap.
- If there is a rally or event, check This Week’s Rallies/Events (Scheduled). Also read the date-specific notices from the Seoul Metropolitan Police Agency.
- Check the official notices again before departure. On site, police hand signals and posted signs take priority.
Do not judge the extent of a restriction from its map location alone. Read the start and end points in the incident description. Restrictions may differ by direction, even on the same road.
Check the closed lanes, affected section and expected end time in TOPIS incident details.
The Source of Seoul’s Real-Time Incident Information
Seoul’s real-time incident information is data on unexpected incidents on Seoul roads. Its source system is the Seoul Transport Operation and Information Service (TOPIS). It is published on the Seoul Open Data Plaza under OA-13315.
The data is provided by the Future Advanced Transportation Division of the Seoul Metropolitan Government’s Transportation Office. The update frequency is listed as real time. No specific update interval is asserted here.
The license is Korea Open Government License Type 1. Commercial use and modification are permitted with attribution. These conditions are stated in the Seoul Real-Time Incident Information dataset.
Korea Open Government License Type 1: Attribution (commercial use and modification permitted)
License for “Seoul Real-Time Incident Information” on the Seoul Open Data Plaza
Road incidents in the [Traffic] tab on the left side of Gilcheck use this data as their source. The road incidents in this tab therefore cover Seoul roads. Do not read it as a list that also covers expressways and roads in other cities and provinces.
How to Read an Incident Entry
To use incident information when planning your trip, read the description as well as the type. The type tells you the incident category. Check the incident details for the actual restricted section and direction.
Start Date and Time and Expected End Date and Time
The start date and time indicate when the incident began. The expected end date and time indicate when it was expected to end. The expected end time having passed does not confirm that the restriction has actually been lifted.
| Field | Meaning | What to check |
|---|---|---|
| Incident type | Incident category, such as an accident or construction | Whether the incident affects your route |
| Start date and start time | The date and time the incident began | Whether it begins before you plan to pass through |
| Expected end date and expected end time | The date and time the incident is expected to end | Whether these are estimates and whether later changes have been announced |
| Incident details | A specific description of the incident and restrictions | Road name, direction, section, lanes, and work details |
| Incident ID | An identifier that distinguishes the incident | Whether you are comparing records for the same incident |
| Link ID and TM X and Y coordinates | Values related to the road section and location | Whether the map location matches the description |
The Open API specification provides 11 fields. Dates and times are separate fields. Incident type codes and detailed type codes are also separate.
Confirmed Incident Type Codes
Only the code names listed below have been confirmed. Do not treat this as the complete code list. Check the remaining names in Seoul Incident Type Code Information.
| Code | Confirmed type name |
|---|---|
| A01 | Traffic accident |
| A02 | Vehicle breakdown |
| A03 | Pedestrian accident |
| A04 | Construction |
| A05 | Fallen objects |
The TOPIS event list also uses the label Rallies and Events. Do not associate this label with an unverified code number. Nor should you use the type code alone to determine whether there is a full closure.
Comparing Full and Partial Closures
Full and partial closures differ in how much traffic access they block. However, even a full closure must be read in terms of the section and direction specified in the notice. Do not interpret it as meaning that the entire road is closed.
| Label | How to read it | Details needed to check your route |
|---|---|---|
| Full closure | A notice blocking passage within the designated closure area | Closure start and end points, direction, and detour guidance |
| Partial closure | A notice restricting certain lanes or sections | Closed lanes, work section, and applicable hours |
| Full closure in both directions | A notice closing both directions of travel in a designated section | The exact section affected in both directions |
A partial closure does not mean you can pass through without delays. Check the incident details for available lanes. Restriction labels and traffic flow information provide different information.
Construction Restrictions Scheduled to End Years Later
Do not assume an entry is an error simply because its expected end year is far in the future. On November 13, 2026, TOPIS listed long-term construction restrictions. These included cases such as the Bongeungyo Structural Improvement Project.
The list at the time included records with expected end dates in 2027 or 2030. These were estimates at the time of the check. Check again just before traveling to see whether the restrictions are currently in effect.
- Read the project name and work section in the incident details.
- Check whether it is a full closure in that direction or a partial closure of individual lanes.
- Check whether daily work hours or separate conditions are specified.
- If the conditions are unclear, do not assume how traffic will operate throughout the construction period. Check with TOPIS or the relevant contact point.
Gilcheck Card Statuses and the Basis for Marking an Incident as Ended
On Gilcheck, read the status together with its basis. Incident cards include a link to the original notice. Do not assume the current situation on site from the status name alone.
| Card status | What to check first | What to watch for when reading |
|---|---|---|
| Scheduled | Effective start time | Check whether the incident begins by the time you plan to pass through |
| Ongoing | Applicable section and hours, and last checked time | Check whether it applies to your direction of travel |
| Normal | Basis for marking the incident as ended and the original notice | Distinguish between a confirmed lifting of restrictions and a status based on other grounds |
“Removed from list” may appear as the basis for marking an incident as ended. “Expected end time passed” may also appear as the basis. Both must be distinguished from confirmation that restrictions have been lifted on site.
| Basis for marking an incident as ended | What has been confirmed | What else to check |
|---|---|---|
| Removed from list | The incident no longer appears in the collected list | Whether there is an official notice lifting the restriction |
| Expected end time passed | The expected time recorded in the entry has passed | Whether an extension or change has been announced |
Your settings for Seoul districts of interest are saved only in your browser. Check the settings again in another browser or on another device. Even if you have selected districts of interest, it is best to check other sections along your route as well.